Rear Toe-In Adjustment
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Jaguar XJR, 2003 Jaguar XJ8, 2003 Jaguar XJ, 2002 Jaguar XJR, and 2002 Jaguar XJ8. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Limited information available from manufacturer.
The differential strut is secured to the wishbone tie assembly. The 2 tie rods are installed between the front of the subframe and the top of the final drive housing. The outer end of each wishbone is secured to its respective hub carrier assembly by a fulcrum bolt. Each fulcrum bolt head incorporates an eccentric circular flange which locates in a groove in the front face of the wishbone arm. Rotation of the fulcrum bolt results in horizontal movement of the bolt shank in an elongated hole in the rear of the wishbone arm. This action achieves corresponding movement of the hub carrier, facilitating adjustment of toe-in.