Gearshift Interlock Manual Override
WARNING: This page is about a different car, the 2003 Jaguar XJR, 2002 Jaguar XJR, and 2001 Jaguar XJR. However, it is still accessible from the selected car via links, so may be relevant.
The interlock system which locks the selector in P and prevents the ignition key from being removed except when P is selected, may be manually overridden in the event of an emergency.
- With the parking brake applied.
- Remove the access blank using a suitable Torx bit.
- Insert a small screwdriver into the vacated hole.
- Push the screwdriver downwards, gently, and hold while simultaneously moving the selector from P towards R , but do not engage R until the tool has been removed.
- An audible warning may be heard when operation 4 is carried out.
- With the selector in N and the access blank replaced, the vehicle may be started.