LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2003 >> XJ8 SC >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Module Communications Network) >> Module Communications Network >> Communications Network - Diagnostic Procedures >> Pinpoint Tests >> Pinpoint Test X: DSCM POWER SUPPLY FAULT
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test X: DSCM POWER SUPPLY FAULT

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Jaguar XKR, 2006 Jaguar XK8, 2005 Jaguar XKR, 2005 Jaguar XK8, and 2004 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK THE PERMANENT SUPPLY TO THE DSCM 

    Disconnect the DSCM electrical connector, SD05.

    Measure the voltage between SD05, pin 05 (NR) and GROUND.

    Is the voltage less than 10 volts? 

    YES:  REPAIR the circuit between the DSCM and battery. This circuit includes the driver side fuse box, (fuse 01) and the high power protection module. For additional information, refer to the wiring diagrams. Test the system for normal operation.

    NO:  Check for DTCs indicating a faulty circuit. Contact dealer technical support for advice on possible PSCM failure

scientia non olet · About LEMON Manuals