LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2007 >> XKR 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls >> Electronic Engine Controls (4.2L, Vehicles With: Supercharger) >> Engine Coolant Temperature (ECT) Sensor - Removal and Installation >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Engine Coolant Temperature (ECT) Sensor - Removal and Installation: Installation

  1. Install the ECT sensor.
    • Install the O-ring seal.
    • Install the retaining clip.
    • Connect the electrical connector.
  2. Install the engine cover. Refer to Engine Cover article.
  3. Top-up the coolant.
  4. Connect the battery ground cable and install the cover.
scientia non olet · About LEMON Manuals