DTC C1A95-64: Wheel Speed Sensor - Signal plausibility failure: Action

NOTE:

This DTC may be set if the vehicle has been driven with a flat tyre.
After clearing the DTCs, the warning indicator (s) may not extinguish until
the vehicle speed has exceeded 10mph (15kph).

Check that the wheels and tires comply with the manufacturer's specification for the vehicle. Check the wheels and tires for condition and balance
Check the installation of the wheel speed sensor wiring harnesses for correct routing
Refer to the applicable SYSTEM WIRING DIAGRAM(S) and check the wheel speed sensor circuits for short circuit to ground, short circuit to power, open circuit, high resistance
Check the wheel speed sensor reluctor rings for damage or de-magnetisation