DTC C105B-01: Actuator Circuit Group B - General Electrical Failure: Action
- Refer to the applicable SYSTEM WIRING DIAGRAMS and check the integrated suspension control module continuously variable damper power supply circuit - Circuit reference VBATT CVD - For short circuit to ground, short circuit to power, open circuit, high resistance. Repair circuit as required, clear DTC and retest
- Refer to the applicable SYSTEM WIRING DIAGRAMS and check the suspension damper solenoid circuits for short circuit to ground, short circuit to power, open circuit, high resistance. Repair circuit as required, clear DTC and retest
- If fault persists, check and install a new integrated suspension control module as required