Pinpoint Test G: Map Display Is Incomplete
- G1: SYSTEM CHECK FOR DTCS
- Check the system for DTCs which may be logged.
Are any system DTCs logged?
- Yes : Carry out repair actions to correct the DTCs logged. Re - check the system for 'Map display is incomplete'.
- No : GO to G2.
- G2: CHECK MAP DISC
- Check map disc for contamination, deformation, cracks, scratches or non - genuine disc and correct market.
Has a fault been identified with the map disc?
- Yes : Replace the map disc. Re - check the system for 'Map display is incomplete'.
- No Check and install a new Navigation Control Module (NCM) as required. Refer to the new module/component installation note at top of DTC Index.
NOTE: Only the navigation voice cannot be heard.