Climate Controlled Seat Module

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00.

NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval program is in operation, prior to the installation of a new module/component.

NOTE: Generic scan tools may not read the codes listed, or may read only five digit codes. Match the five digits from the scan tool to the first five digits of the seven digit code listed to identify the fault (the last two digits give additional information read by the manufacturer approved diagnostic system).

NOTE: When performing electrical voltage or resistance tests, always use a digital multimeter (DMM) accurate to three decimal places, and with an up-to-date calibration certificate. When testing resistance, always take the resistance of the DMM leads into account.

NOTE: Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests.

NOTE: Inspect connectors for signs of water ingress, and pins for damage and/or corrosion.

NOTE: If DTCs are recorded and, after performing the pinpoint tests, a fault is not present, an intermittent concern may be the cause. Always check for loose connections and corroded terminals.

DTC	Description	Possible Cause	Action
B10B913	Blower Control	Left blower control circuit - open circuit Left blower motor - open circuit Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check left blower control circuit for open circuit. Check and install new left blower motor, climate controlled seat module as required, refer to the new module/component installation note at the top of the DTC Index
B10B94B	Blower Control	Mechanical restriction within the left blower motor housing Left blower control circuit - short to ground Left blower motor - short to ground Climate controlled seat module failure	Check for mechanical restriction within the left blower motor housing. Refer to the electrical circuit diagrams and check left blower control circuit for short to ground. Check and install new left blower motor, climate controlled seat module as required, refer to the new module/component installation note at the top of the DTC Index
B115713	Blower Control "B"	Right blower control circuit - open circuit Right blower motor - open circuit Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check right blower control circuit for open circuit. Check and install new right blower motor, climate controlled seat module as required, refer to the new module/component installation note at the top of the DTC Index
B11574B	Blower Control "B"	Mechanical restriction within the right blower motor housing Right blower control circuit - short to ground Right blower motor - short to ground Climate controlled seat module failure	Check for mechanical restriction within the right blower motor housing. Refer to the electrical circuit diagrams and check right blower control circuit for short to ground. Check and install new right blower motor, climate controlled seat module as required, refer to the new module/component installation note at the top of the DTC Index
B120E13	Right Thermal Electric Device Control	Right seatback/cushion thermal electric device control circuits - open circuit Thermal electric device failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check right seatback/cushion thermal electric device control circuits for open circuit. Check and install new thermal electric device/climate controlled seat module as required, refer to the new module/component installation note at the top of the DTC Index
B120E19	Right Thermal Electric Device Control	Right seatback/cushion thermal electric device control circuits - short to ground Thermal electric device failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check right seatback/cushion thermal electric device control circuits for short to ground. Check and install new thermal electric device/climate controlled seat module as required, refer to the new module/component installation note at the top of the DTC Index
B120E4B	Right Thermal Electric Device Control	Right seatback/cushion thermal electric device control circuits - short to ground Blocked thermal electric device duct (restriction in airflow) Thermal electric device failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Check for restriction in thermal electric device duct. Refer to the electrical circuit diagrams and check right seatback/cushion thermal electric device control circuits for short to ground. Check and install new thermal electric device/climate controlled seat module as required, refer to the new module/component installation note at the top of the DTC Index
B122413	Left Thermal Electric Device Control	Left seatback/cushion thermal electric device control circuits - open circuit Thermal electric device failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check left seatback/cushion thermal electric device control circuits for open circuit. Check and install new thermal electric device/climate controlled seat module as required, refer to the new module/component installation note at the top of the DTC Index
B122419	Left Thermal Electric Device Control	Left seatback/cushion thermal electric device control circuits - short to ground Thermal electric device failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check left seatback/cushion thermal electric device control circuits for short to ground. Check and install new thermal electric device/climate controlled seat module as required, refer to the new module/component installation note at the top of the DTC Index
B12244B	Left Thermal Electric Device Control	Left seatback/cushion thermal electric device control circuits - short to ground Blocked thermal electric device duct (restriction in airflow) Thermal electric device failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Check for restriction in thermal electric device duct. Refer to the electrical circuit diagrams and check left seatback/cushion thermal electric device control circuits for short to ground. Check and install new thermal electric device/climate controlled seat module as required, refer to the new module/component installation note at the top of the DTC Index
B122A11	Right Seat Cushion Blower Speed Sensor	Right seat cushion blower speed sensor circuit - short to ground Internal motor failure Climate controlled seat module failure	Refer to the electrical circuit diagrams and check right seat cushion blower speed sensor circuit for short to ground. Check and install a new motor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122A12	Right Seat Cushion Blower Speed Sensor	Right seat cushion blower speed sensor circuit - short to power Internal motor failure Climate controlled seat module failure	Refer to the electrical circuit diagrams and check right seat cushion blower speed sensor circuit for short to power. Check and install a new motor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122B11	Right Seat Back Blower Speed Sensor	Right seatback blower speed sensor circuit - short to ground Internal motor failure Climate controlled seat module failure	Refer to the electrical circuit diagrams and check right seatback blower speed sensor circuit for short to ground. Check and install a new motor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122B12	Right Seat Back Blower Speed Sensor	Right seatback blower speed sensor circuit - short to power Internal motor failure Climate controlled seat module failure	Refer to the electrical circuit diagrams and check right seatback blower speed sensor circuit for short to power. Check and install a new motor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122C11	Left Seat Cushion Blower Speed Sensor	Left seat cushion blower speed sensor circuit - short to ground Internal motor failure Climate controlled seat module failure	Refer to the electrical circuit diagrams and check left seat cushion blower speed sensor circuit for short to ground. Check and install a new motor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122C12	Left Seat Cushion Blower Speed Sensor	Left seat cushion blower speed sensor circuit - short to power Internal motor failure Climate controlled seat module failure	Refer to the electrical circuit diagrams and check left seat cushion blower speed sensor circuit for short to power. Check and install a new motor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122D11	Left Seat Back Blower Speed Sensor	Left seatback blower speed sensor circuit - short to ground Internal motor failure Climate controlled seat module failure	Refer to the electrical circuit diagrams and check left seatback blower speed sensor circuit for short to ground. Check and install a new motor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122D12	Left Seat Back Blower Speed Sensor	Left seatback blower speed sensor circuit - short to power Internal motor failure Climate controlled seat module failure	Refer to the electrical circuit diagrams and check left seatback blower speed sensor circuit for short to power. Check and install a new motor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122E13	Right Seat Cushion	Right seat cushion temperature sensor circuit - open circuit Temperature sensor failure Climate controlled seat module failure	Refer to the electrical circuit diagrams and check right seat cushion temperature sensor circuit for open circuit. Check and install a new sensor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122E98	Right Seat Cushion	Blockage in the right seat cushion thermal electric device fan exhaust vent Right seat cushion thermal electric device fan movement restricted	Check/remove any blockage/restriction from the right seat cushion thermal electric device fan exhaust vent
B122F13	Right Seat Back	Right seatback temperature sensor circuit - open circuit Temperature sensor failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check right seatback temperature sensor circuit for open circuit. Check and install a new sensor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122F98	Right Seat Back	Blockage in the right seatback thermal electric device fan exhaust vent Right seatback thermal electric device fan movement restricted	Check/remove any blockage/restriction from the right seatback thermal electric device fan exhaust vent
B120F13	Left Seat Cushion	Left seat cushion temperature sensor circuit - open circuit Temperature sensor failure Climate controlled seat module failure	Refer to the electrical circuit diagrams and check left seat cushion temperature sensor circuit for open circuit. Check and install a new sensor/module as required, refer to the new module/component installation note at the top of the DTC Index
B120F98	Left Seat Cushion	Blockage in the left seat cushion thermal electric device fan exhaust vent Left seat cushion thermal electric device fan movement restricted	Check/remove any blockage/restriction from the left seat cushion thermal electric device fan exhaust vent
B123013	Left Seat Back	Left seatback temperature sensor circuit - open circuit Temperature sensor failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check left seatback temperature sensor circuit for open circuit. Check and install a new sensor/module as required, refer to the new module/component installation note at the top of the DTC Index
B123098	Left Seat Back	Blockage in the left seatback thermal electric device fan exhaust vent Left seatback thermal electric device fan movement restricted	Check/remove any blockage/restriction from the left seatback thermal electric device fan exhaust vent
B12317A	Right Seat	Temperature difference between seatback and cushion	Check/remove any blockage/restriction from the right seatback and cushion thermal electric device fan exhaust vent
B12327A	Left Seat	Temperature difference between seatback and cushion	Check/remove any blockage/restriction from the left seatback and cushion thermal electric device fan exhaust vent
B122313	Right Seat Cushion Temperature Sensor	Right seat cushion temperature sensor circuit - open circuit Temperature sensor failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check right seat cushion temperature sensor circuit for open circuit. Check and install a new sensor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122513	Right Seat Back Temperature Sensor	Right seatback temperature sensor circuit - open circuit Temperature sensor failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check right seatback temperature sensor circuit for open circuit. Check and install a new sensor/module as required, refer to the new module/component installation note at the top of the DTC Index
B122913	Left Seat Back Temperature Sensor	Left seatback temperature sensor circuit - open circuit Temperature sensor failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check left seatback temperature sensor circuit for open circuit. Check and install a new sensor/module as required, refer to the new module/component installation note at the top of the DTC Index
B123513	Left Seat Cushion Temperature Sensor	Left seat cushion temperature sensor circuit - open circuit Temperature sensor failure Climate controlled seat module failure	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check left seat cushion temperature sensor circuit for open circuit. Check and install a new sensor/module as required, refer to the new module/component installation note at the top of the DTC Index
U000188	High Speed CAN Communication Bus	Bus off	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check CAN network to climate controlled seat module for short, open circuit
U001088	Medium speed Can communication Bus	Bus off	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check CAN network to climate controlled seat module for short, open circuit
U014000	Lost communication with CJB	Lost communication with CJB	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system
U014200	Lost communication with RJB	Lost communication with RJB	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system
U015500	Lost communications with instrument cluster	Lost communications with instrument cluster	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system. Refer to the electrical circuit diagrams and check CAN network to climate controlled seat module and instrument cluster for short, open circuit
U015600	Lost Communication With Information Centre "A"	Lost communications with information and entertainment control module	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system
U030000	Internal control module software incompatibility	Invalid configuration message is received	Re-configure the climate controlled seat module and the RJB using the manufacturer approved diagnostic system. Clear the DTC and retest. If the DTC is still logged suspect the climate controlled seat module, refer to the new module installation note at the top of the DTC Index
U040100	Invalid Data Received From ECM/PCM	Poor engine speed quality factor	Check ECM for speed related DTCs and refer to the relevant DTC Index. On software levels previous to 8X23-14B663-AE clear the DTC and take no further action if the system is operating correctly
U210100	Control Module Configuration Incompatible	Calibration incomplete/corrupt	Re-configure the climate controlled seat module using the manufacturer approved diagnostic system
U300004	Control Module	Internal electronic failure	Check and install a new climate controlled seat module as required, refer to the new module/component installation note at the top of the DTC Index
U300362	Battery Voltage	Mis-match in battery voltage, of 2 volts or more, between climate controlled seat module and RJB	Carry out any pinpoint tests associated with this DTC using the manufacturer approved diagnostic system