DTC B10A2-35: Crash Input - Signal high time > maximum: Action
- This DTC is set when the 'airbag deployed' signal supplied by the restraints control module is outside the specification expected by the engine control module
- Refer to the applicable SYSTEM WIRING DIAGRAM(S) and check the power and ground connections to the restraints control module
- Check the restraints control module for DTCs and refer to the relevant DTC index
- Check central junction box for DTCs and refer to the relevant DTC index
- Refer to applicable SYSTEM WIRING DIAGRAM(S) and check the crash input circuit for failures. This circuit is a single wire which connects the restraints control module to the central junction box and the engine control module. Check this circuit for short circuit to power, short circuit to ground, open circuit. Repair harness as required
- Using the Jaguar Land Rover approved diagnostic equipment, clear all stored DTCs using the `Diagnosis Menu' tab and retest