Pedestrian Protection Hood Actuator RH: Installation
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Install the pedestrian protection actuator.
- Tighten the new Torx bolts to 8 Nm (6 lb.ft).
- Install the pedestrian protection actuator and bracket.
- Connect the electrical connector.
- Secure the pedestrian protection actuator bracket.
- Attach the wiring harness clips.
- Tighten the bolts to 8 Nm (6 lb.ft).
- Install the air intake cover.
- Carefully secure the clips.