LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2013 >> XK Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Pedestrian Protection System) >> Pedestrian Protection System >> Removal And Installation >> Pedestrian Protection Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pedestrian Protection Module: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pedestrian protection module.
    • Connect the electrical connector.
    • Tighten the new Torx bolts to 10 Nm (7 lb.ft).
  2. Install the front LH fender splash shield. Refer to Fender Splash Shield information.
  3. Using WDS, configure a new module.
scientia non olet · About LEMON Manuals