Pedestrian Protection Module: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The pedestrian protection module must be renewed if the system has deployed on 3 occasions.

Make the pedestrian protection system safe.
Remove the front LH fender splash shield. Refer to Fender Splash Shield information.
Remove the pedestrian protection module.
- Remove and discard the 2 Torx bolts.
- Disconnect the electrical connector.