LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2013 >> XK Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Climate Control System - General Information) >> Climate Control System - General Information >> Diagnostic Procedures >> Climate Control System >> Pinpoint Tests >> Pinpoint Test B: Functionality Tests
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test B: Functionality Tests

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. B1: FUNCTIONALITY TEST 1 
    1. Close the valves on the air conditioning station
    2. Connect the air conditioning station to the vehicle charging ports
    3. Open all doors and the tailgate
    4. Start the engine
    5. Set the temperature to the lowest setting (all zones)
    6. Set the fan speed to maximum
    7. Set the recirculate switch to off
    8. Insert a temperature probe into the center air vent
    9. Raise engine speed to 1500rpm and maintain this speed for 5 minutes
    10. Record the temperature value
    11. Record the pressure values
    12. Are the pressure readings stable and in the green 'normal' region of the gauge? 

      YES:  Air conditioning system operating normally

      NO:  Air conditioning system fault present. GO to Pinpoint Test C .