DTC B102B-67: Passive Key - Signal incorrect after event: Action

Refer to the applicable system wiring diagram(s) and check the power and ground connections to the central junction box and the remote keyless entry module
Using the manufacturer approved diagnostic system, complete a CAN network integrity test. Refer to the applicable system wiring diagram(s) and check the CAN network between the central junction box and remote keyless entry module
Re-synchronise ID by re-configuring the central junction box as a new module. Clear DTC and retest
Re-synchronise ID by re-configuring the remote keyless entry module as a new module. Clear DTC and retest