DTC B0075-2B: Second Row Right Seatbelt Pretensioner Deployment Control - Signal cross coupled: Action

NOTE: The airbag connector has a locking plunger (orange tab) which should only fully lock when the two connectors are securely mated, male to female. If the plunger can move to the locked position easily when not mated (ie: using reasonable pressure), then this indicates that the connector is damaged. Install a new wiring harness as necessary.

Refer to the applicable System Wiring Diagram(s) and and check the rear right seatbelt retractor pretensioner circuit for short circuit to another restraints circuit