DTC C102C-22: Right Rear Vertical Acceleration Sensor - Signal amplitude > maximum: Action
NOTE:
The rear right vertical acceleration sensor signal voltage should be 1.9V to 2.1V when the vehicle is parked on a level surface.
- Park the vehicle on a level surface. Using Jaguar Land Rover approved diagnostic equipment, check datalogger signal - Rear Right Vertical Acceleration Sensor Voltage (0x200E). If the signal is outside of the specified range, refer to the appropriate system wiring diagrams and check the rear right vertical acceleration sensor circuit for short circuit to another circuit
- Check the installation of the rear right vertical acceleration sensor
- Using Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, install a new rear right vertical acceleration sensor