DTC U2300-55: Central Configuration - Not configured: Actuin
- Using the manufacturer approved diagnostic system, re-configure the central junction box with the latest level software
- Using the manufacturer approved diagnostic system, check and update the car configuration file as necessary
- Once updated, download the latest car configuration file to the gateway module
- Clear DTC, switch on ignition for at least 30 seconds, then retest
- Using the manufacturer approved diagnostic system, perform a CAN network integrity test. Refer to the applicable SYSTEM WIRING DIAGRAMS and check the medium speed CAN bus (body) circuit for short circuit to ground, short circuit to power, open circuit, high resistance