U2008-54 Sensor Cluster - Missing calibration: Action
- With the ignition on and the vehicle stationary, using the manufacturer approved diagnostic system, perform the Calibrate Acceleration Sensor(s) routine (0x300F). Clear DTC and retest
- If a new vehicle dynamics control module has been installed, the module will need to be calibrated using the following procedures. First, using the manufacturer approved diagnostic system, perform the Learn VIN routine (0x404). Check this routine has been performed and completed successfully before proceeding. Next, with the ignition on and the vehicle stationary, using the manufacturer approved diagnostic system, perform the Calibrate Acceleration Sensor(s) routine (0x300F)