DTC U2300-51: Central Configuration - Not programmed: Action

NOTE: This DTC will be logged if the CCF file in the vehicle has been changed

Using the Jaguar Land Rover approved diagnostic equipment, run the SDD application - Entertainment System - InControl Touch Pro Variant Configuration - to reset and relearn the appropriate infotainment system configuration. Clear the DTCs and retest after 3 minutes in the second ignition cycle after reconfiguring
Using the Jaguar Land Rover approved diagnostic equipment, reconfigure the infotainment master controller with the latest level software
If the fault persists, do not replace the infotainment master controller. Contact the Jaguar Land Rover service desk for further assistance