DTC U0455-56: Invalid Data Received From Restraints Occupant Classification System Module -Invalid/incomplete configuration: Action
NOTE:
- If a new occupant classification sensor service kit is installed the new module replacement and programming procedure must be performed
- Rectify all occupant classification system related DTCs before clearing DTCs
- After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the DTCs
- Using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary. Clear the DTCs and retest
- Install the correct passenger seat type as necessary and follow the new module reprogramming procedure. Refer to workshop service information article OCCUPANT CLASSIFICATION SENSOR CONTROL MODULE (OCSCM) NEW MODULE REPLACEMENT AND PROGRAMMING
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - Learn Seat Occupant Classification Zero Position