DTC U2101-56: Control Module Configuration Incompatible - Invalid/incomplete configuration: Action

NOTE:

After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the Diagnostic Trouble Code(s).
After installing a new transmission control module, perform routines - Configure New Module (Without Transmission Replacement), Transmission Control Module Adaption.

Prioritized steps to perform:
Using the Jaguar Land Rover approved diagnostic equipment, reconfigure the transmission control module with the latest level software
Using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary. Clear the Diagnostic Trouble Code(s) and retest
Install a new transmission control module as necessary