'As-Built Is Missing From The TESTER' Error Message When Programming/Update Module Software (SSM74691)

Publication date: 2020-01-13
Reference number: SSM74691

'AS-BUILT IS MISSING FROM THE TESTER' ERROR MESSAGE WHEN PROGRAMMING/UPDATE MODULE SOFTWARE

TECHNICAL SERVICE BULLETIN

Reference Number(s): SSM74691, Date of Issue: January 22, 2020

JAGUAR:	E-PACE/X540; F-PACE/X761; F-TYPE/X152; I-PACE/X590; XE/X760; XF/X260
SERVICE CATEGORY:	Diagnostic Software Hardware

ISSUE

When attempting to complete a "Replace ECU" or an "Update ECU" on a module that requires an As-Built, the error message detailed below may be displayed:

"As-Built is missing from the tester"

CAUSE

PATHFINDER fails to identify the machine architecture. Due to this problem, it is unable to correctly identify the diagnostic machine architecture; this prevents the application from resolving the required software using the As-Built information.

PERMANENT CORRECTIVE ACTION

This concern has been resolved with the release of PATHFINDER version 267. The manual patch will no longer be available to download and this SSM will be deleted in 7 days.