DTC P3410-7C: Cylinder 2 Deactivation/Intake Valve Control Circuit Performance - Slow response: Action
- Vehicle Conditions to enable DTC Logging Strategy
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Refer to the appropriate system wiring diagrams and check the continuously variable valve lift solenoid circuit for
- Short circuit to ground
- Short circuit to power
- Open circuit
- High resistance
- Check and install a new continuously variable valve lift solenoid, only when diagnosed as failed
- Refer to the appropriate system wiring diagrams and check the power and ground connections to the module
- Using the Jaguar Land Rover approved diagnostic equipment check and install latest relevant level of software to the powertrain control module
- Check and install a new powertrain control module, only when diagnosed as failed. Using the Jaguar Land Rover approved diagnostic equipment, configure the powertrain control module as a new module