DTC U2012-86: Car Configuration Parameter(s) - Signal invalid: Action
NOTE:
The FlexRay wiring harness must not be repaired by making a localized wiring repair. A new wiring harness should be installed.
- Refer to the appropriate System Wiring Diagram(s) and check the body control module power and ground circuits for open circuit, high resistance. Repair the wiring harness as necessary
- Refer to the appropriate System Wiring Diagram(s) and check the FlexRay bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the body control module for related DTCs and refer to the relevant DTC index
- Using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary. Clear the DTCs and retest