DTC P245C-11: Exhaust Gas Recirculation Cooler Bypass Control Circuit Low Bank 1 - Circuit short to ground: Action
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Refer to the appropriate System Wiring Diagram(s) and check the exhaust gas recirculation cooler bypass valve solenoid circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair harness as required
- Check and install a new exhaust gas recirculation cooler bypass valve solenoid
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest