DTC P06FB-96: Glow Plug Control Module 2 Memory Checksum Error - Component internal failure: Action
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the glow plug control module power and ground circuits for open circuit, high resistance. Repair the wiring harness as necessary
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the LIN bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, install a new glow plug control module