DTC B1408-2B: Driver Seatbelt Anchor Pretensioner Deployment Control - Signal cross coupled: Action

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The deployable device connector has a locking plunger (orange tab) which should only fully lock when the two connectors are securely mated, male to female. If the plunger can move to the locked position easily when not mated (ie: using reasonable pressure), then this indicates that the connector is damaged. Repair the wiring harness as necessary

Refer to the electrical circuit diagrams and check the driver seatbelt anchor pretensioner circuit for short circuit to another restraints circuit