Control Switch Continuity
Control switch continuity test is performed at steering column using an ohmmeter. Refer to following chart to determine switch continuity condition.
NOTE:
Pushbutton cannot be depressed with slide switch in "RES" position.
CONTROL SWITCH CONTINUITY CONDITIONS
| Application | Switch Position | Condition | ||
|---|---|---|---|---|
| Red/Brown | "OFF" | Open | ||
| Red/Green | "OFF" | Open | ||
| Red/Yellow | "OFF" | Open | ||
| Red/Brown | "ON" | Closed | ||
| Red/Green | "ON" | Closed | ||
| Red/Yellow | "ON" | Open | ||
| Red/Brown | "RES" | Closed | ||
| Red/Green | "RES" | Closed | ||
| Red/Yellow | "RES" | Closed | ||
| Red/Brown | "ON"(1) | Closed | ||
| Red/Green | "ON"(1) | Open | ||
| Red/Yellow | "ON"(1) | Closed | ||
|
||||