LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1982 >> CJ7 Base, 4.2L Eng VIN C, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> MOTORCRAFT Solid State Ignition (SSI) >> Testing >> Ignition Coil Resistance Check >> Primary Resistance
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Primary Resistance

  1. Remove connector from positive and negative coil terminals. Be sure ignition switch is "OFF". Set an ohmmeter on low scale, and connect ohmmeter leads to positive and negative terminals.
  2. Ohmmeter reading should be 1.13-1.23 ohms at 75°F (24°C). With coil temperature at 200°F (93°C), a 1.5 ohm reading is acceptable.
scientia non olet · About LEMON Manuals