LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1985 >> Wagoneer Limited, 2.8 W, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustments >> Turning Angle
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Turning Angle

  1. The turning angle stop screws are located on back side of steering knuckle, just above axle centerline. To adjust, loosen lock nut on stop screw.
  2. Using full-floating turn table under each wheel, adjust stop screw IN to increase turning angle and OUT to decrease turning angle. Tighten lock nut.
TURNING ANGLE ADJUSTMENT

Application Left Wheel Right Wheel
Cherokee & Wagoneer (1) 32-33° 32-33°
CJ7 & Scrambler 30-31° 30-31°
(1) This angle may be reduced to allow 1/2" (13 mm) minimum clearance between front sway bar bracket and tire at full turn.
scientia non olet · About LEMON Manuals