LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1987 >> Comanche Base, 2.5 H, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Multi-Point >> Testing >> System Testing >> O2 Sensor Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

O2 Sensor Test

NOTE: For additional oxygen sensor information, see TITANIA OXYGEN SENSOR TESTING article.

Disconnect the O2 sensor connector. Connect an ohmmeter to terminals "A" and "B" (marked on the connector) of the O2 sensor connector. Resistance should be between 5 and 7 ohms. Replace the sensor if the ohmmeter indicates an infinity reading.