October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Circuit Breaker Test
- Disconnect Yellow wire from circuit breaker and connect a 12-volt test light between Yellow wire and ground. Turn ignition on. If test light does not glow, an open exists in wire or ignition switch is defective.
- Reconnect Yellow wire to circuit breaker. Disconnect wire from circuit breaker and connect test light to circuit breaker terminal and ground. If test light glows, circuit breaker is good. If test light does not glow, circuit breaker is defective.