LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1990 >> Cherokee Base, 2D Utility, 2.5 E, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Coolant Temperature Sensor (Cts) R & I >> Procedure >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Coolant Temperature Sensor (Cts) R & I: Procedure: Installation

  1. Install the CTS to the cylinder block. Tighten the CTS to 21 Ft. Lbs. (28 Nm).
  2. Connect the CTS wire connector.
  3. Install air cleaner assembly.
  4. Fill the cooling system.
scientia non olet · About LEMON Manuals