LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1990 >> Cherokee Laredo, 2D Utility, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Ignition System Tests - 4.0L >> Overhaul >> Stator Replacement >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stator Replacement: Reassembly

  1. Install stator assembly and the stator retaining screw.
  2. Position the stator assembly harness through the distributor housing and push the grommet into position.
  3. Install distributor shaft into the distributor housing. If the shaft is equipped with seals, ensure that they are in place and not damaged.
  4. Install the distributor gear washer and distributor gear onto the shaft.
  5. Install the distributor gear retaining pin.
  6. Install the distributor rotor.
  7. Install the distributor as specified in DISTRIBUTOR R & I  under REMOVAL & INSTALLATION above in this article.
scientia non olet · About LEMON Manuals