LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1990 >> Wrangler Base, 4.2 T, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Manifold Air Temperature (Mat) Sensor R & I >> Procedure >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Manifold Air Temperature (Mat) Sensor R & I: Procedure: Installation

  1. Install the MAT sensor to the cylinder block. Tighten the MAT sensor to 21 Ft. Lbs. (28 Nm).
  2. Connect the MAT sensor wire connector.
scientia non olet · About LEMON Manuals