LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1992 >> Cherokee Base, 2D Utility, 2.5 P, 4WD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Removal & Installation (Cherokee & Comanche)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (Cherokee & Comanche)

  1. Relieve fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE under FUEL SYSTEM. Remove fuel tank filler cap, and siphon fuel out of fuel tank. Raise and support vehicle. Disconnect fuel gauge sending unit connector.
  2. Disconnect fuel tank vent hose and return hoses from fuel pump/fuel gauge sending unit. Using drift punch and hammer, carefully remove fuel pump lock ring counterclockwise. Remove fuel pump/fuel gauge sending unit and "O" ring. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals