LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1992 >> Wrangler Base, 4.0 S, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starter - BOSCH/MITSUBISHI >> Testing (On-Vehicle) >> Solenoid Test >> Functional Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Functional Test

  1. With a fully-charged battery, connect a heavy gauge jumper wire between battery terminal and solenoid terminal wire connector at starter relay. If engine cranks, solenoid is okay.
  2. If engine does not crank, check battery cable for voltage to starter solenoid BAT terminal. Jump starter relay terminals as in step 1), checking for voltage at solenoid terminal No. 50. Repair as necessary. If engine still does not crank, repair or replace starter.
scientia non olet · About LEMON Manuals