LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1992 >> Wrangler Islander, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Sensors & Switches >> Oxygen (O2) Sensor (Heating Element)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Oxygen (O2) Sensor (Heating Element)

  1. Disconnect oxygen sensor connector. Using an ohmmeter, check sensor heating element resistance.
  2. On Comanche and Cherokee, connect ohmmeter to Black/Tan and Dark Green/Black sensor wires. On Wrangler, connect ohmmeter to Black and Dark Green/Black sensor wires.
  3. Heating element resistance should be 5-7 ohms. Replace oxygen sensor if ohmmeter reads infinity.
scientia non olet · About LEMON Manuals