LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1993 >> Cherokee Base, 2D Utility, 2.5 P, 4WD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Tank >> Removal & Installation (Grand Cherokee)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (Grand Cherokee)

  1. Disconnect negative battery cable. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Raise and support vehicle. Remove fuel tank filler and vent hose at filler tube. Remove rear tow hooks (if equipped). Remove skid plate.
  2. Remove trailer hitch (if equipped). Remove exhaust tailpipe heat shield. Disconnect fuel supply line at filter. Disconnect fuel return and vent lines at tank. Disconnect fuel pump module harness connector. Support fuel tank with transmission jack.
  3. Remove tank strap nuts and move straps away from tank. Lower right side of tank while feeding fuel hoses through access hole in body. Remove filler hoses from tank. Insert siphon hose and drain tank. Lower and remove tank. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals