LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1993 >> Cherokee Base, 2D Utility, 2.5 P, 4WD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Camshaft Position Sensor >> Removal & Installation (5.2L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (5.2L)

Disconnect negative battery cable. Remove distributor cap. Disconnect camshaft position sensor connector from harness connector. Remove distributor rotor. Lift and remove sensor from distributor. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals