LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1993 >> Wrangler Base, 2.5 P >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel System Pressure Release
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel System Pressure Release

WARNING: ALWAYS relieve fuel pressure before disconnecting any fuel injection-related component. DO NOT allow fuel to contact engine or electrical components.
  1. Disconnect negative battery cable. Loosen fuel filler cap to release tank pressure. Remove protective cap from pressure test port on fuel rail. Using appropriate fuel pressure gauge/hose with gauge removed, place gauge end of hose into approved gasoline container.
  2. To release pressure, screw other end of hose onto pressure test port. After pressure is released, remove hose from test port and install protective cap.
scientia non olet · About LEMON Manuals