LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1994 >> Wrangler S, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition System: Distributor: Removal

  1. Disconnect negative battery cable. Remove distributor cap. Rotate engine crankshaft until distributor rotor is pointing toward cylinder No. 1 of distributor cap and engine is at TDC.
  2. Scribe mark on distributor and adjacent component as reference to indicate rotor and distributor housing position when reinstalling distributor. Disconnect camshaft position sensor harness connector. Remove distributor hold-down nut. Lift distributor from engine.
scientia non olet · About LEMON Manuals