LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1996 >> Cherokee Classic, Part Time, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 4.0L >> Diagnostic Trouble Code (DTC) Identification >> Test TC-186A - Misfire Adaptive Numerator At Limit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test TC-186A - Misfire Adaptive Numerator At Limit

NOTE: For connector terminal identification, refer to CONNECTOR IDENTIFICATION . For wiring diagram, see WIRING DIAGRAMS article in this section.
  1. Disconnect Crankshaft Position (CKP) sensor connector. Inspect connector and terminals for damage. Repair connector and terminals as necessary and perform TEST VER-5A . If connector and terminals are okay, go to next step.
  2. Check installation of CKP sensor. Properly install CKP sensor and perform TEST VER-5A. If CKP sensor is properly installed, go to next step.
  3. Remove crankshaft position sensor. Inspect flexplate slots for damage or excessive movement. Repair flexplate as necessary and perform TEST VER-5A. If flexplate is okay, replace CKP sensor and perform TEST VER-5A .
scientia non olet · About LEMON Manuals