Engine Controls - Tests W/O Codes - 2.5L: Introduction

CAUTION: When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.

Before diagnosing symptoms or intermittent faults, perform steps in the following BASIC TESTING and TESTS W/CODES articles:

F - BASIC TESTING
G - TESTS W/CODES

Use these articles to diagnose driveability problems existing when a hard Diagnostic Trouble Code (DTC) is not present.

NOTE: Some driveability problems may have been corrected by manufacturer with a revised Powertrain Control Module (PCM). Check with manufacturer for latest PCM.

Symptom checks direct technician to malfunctioning component(s) for further diagnosis. A symptom should lead to a specific component, system test or an adjustment.

Use intermittent test procedures to locate driveability problems that do not occur when the vehicle is being tested. These test procedures should also be used if a soft (intermittent) DTC code is present, but no problem is found during self-diagnostic testing.

NOTE: For specific testing procedures, see appropriate SYSTEM/COMPONENT TESTS article. For specifications, see ADJUSTMENTS or SPECIFICATIONS articles.