September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Final Procedure
- Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Inspect engine oil for fuel contamination. Change engine oil and filter as necessary. Attempt to start engine.
- If engine does not start, check for Technical Service Bulletins (TSBs) that apply to vehicle and return to TEST NS-1A: QUALIFYING NO START CONDITION
if necessary. If engine starts, repair is complete. Go to next step.
- Turn ignition on, with engine off. Using scan tool, erase DTCs. Turn ignition off. Disconnect scan tool. Test is complete.