LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1999 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Verification Tests >> Test VER-5A3
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-5A3

  1. Using scan tool, monitor pretest enabling conditions until all conditions have been met to run the appropriate monitor. Run appropriate monitor for repaired DTC. Go to next step.
  2. If the repaired OBD-II DTC was reset, or the OBD-II monitor failed after running, the repair is not complete. Check for related Technical Service Bulletins (TSBs) or flash updates. If repaired DTC or another DTC exists, perform appropriate test(s) listed under SELF-DIAGNOSTIC TESTS. See DTC MESSAGES & CODES table. If no DTCs return, test is complete. Go to next step.
  3. Turn ignition on, with engine off. Using scan tool, erase DTCs. Turn ignition off. Disconnect scan tool. Test is complete.
scientia non olet · About LEMON Manuals