With Main Bearing Replacement

1. Tighten the bolts of main bearing caps # 1, 3, 4 and 5 in three steps.
- 54 Nm (40 ft. lbs.)
- 95 Nm (70 ft. lbs.)
- 108 Nm (80 ft. lbs.)

2. Push the crankshaft forward and backward. Load the crankshaft front or rear and tighten the bolts of main bearing cap # 2 in three steps.
- 54 Nm (40 ft. lbs.)
- 95 Nm (70 ft. lbs.)
- 108 Nm (80 ft. lbs.)