October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal & Installation

Disconnect negative battery cable. Powertrain Control Module (PCM) is located on left front inner fender. Remove PCM connector cover. Disconnect 3 PCM connectors. Remove 3 screws attaching PCM to left front inner fender. Remove PCM from vehicle. To install, reverse removal procedure. If PCM was replaced, new PCM must be programmed with Vehicle Identification Number (VIN), mileage and secret key data, or vehicle will not start. See PROGRAMMING .