LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2000 >> Wrangler SE, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Removal & Installation >> Powertrain Control Module >> Removal & Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation

PCM is located in engine compartment, next to battery. Disconnect negative battery cable. Remove cover for access to electrical connectors at PCM. Disconnect electrical connectors from PCM. Remove PCM retaining bolts and PCM. To install, reverse removal procedure. Tighten PCM retaining bolts to 35 INCH lbs. (4 N.m).

scientia non olet · About LEMON Manuals