LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2001 >> Wrangler Sahara, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Starter >> Starting System >> On-Vehicle Testing >> Park/Neutral Position Switch
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Park/Neutral Position Switch

  1. Place gear selector lever in Park. Disconnect negative battery cable. Raise and support vehicle. Disconnect Park/Neutral Position (PNP) switch 3-pin connector. Using DVOM, check for continuity between switch center terminal and good ground. If continuity exists, go to next step. If continuity does not exist, replace faulty PNP switch.
  2. Place gear selector lever in Reverse. Check for continuity between switch center terminal and good ground. If continuity does not exist, switch is okay. If continuity exists, replace faulty (PNP) switch.
scientia non olet · About LEMON Manuals